DCC Corp.
7250-B Westfield Ave.
Pennsauken,NJ 08110,US
Phone: 856-662-7272
Fax: 856-662-7862
Toll-free: 800-991-5207
Email: info@dcc-c.com
Website: http://www.dcccorporation.com
All Categories > Compare HotSpot Welders > Compare Items  
  Compare Items

Compare HotSpot Welders



Our HotSpot capacitive discharge thermocouple welders are designed to solve your thermocouple fabrication and attachment problems. Using stored energy, the welder generates an electric arc for fusing standard thermocouple elements into freestanding beads.  This same process can be used to weld the thermocouple directly to any thickness base metal, as well as to close tubes, attach pins, or perform light spot welding.  There are three models to suit your application needs.

Items
HotSpot II welder with tools
20-A10120R
HotSpot II Heavy Duty Welder
HotSpot Plus welder with tools
40-A10240R
HotSpot PLUS CD Welder
HotSpot welder with tools
10-A1020R
HotSpot Thermocouple Welder
List Price
$1,095.00 $1,595.00 $745.00
Product Type
Thermocouple Welders Heavy Duty Thermocouple Welders Thermocouple Welders
Height
3.5 inches 3.5 inches 3.25 inches
Depth
8.5 inches 8.5 inches 6.25 inches
Width
11.5 inches 11.5 inches 6 inches
Weight
14 lbs 18 lbs 6.25 lbs
Stored Weld Energy
5 to 250 watt/sec 5 to 525 watt/sec 5 to 50 watt/sec
Weld Capability
Welds wire pairs of #14 gauge or finer, and #8 or lighter studs Welds wire pairs of #12 gauge or finer, and #10 or lighter studs, and #10 pins Welds wire pairs of #24 gauge or finer (#20 for J, K & E)
Cycle Time
Charging time at maximum energy setting is less than 10 seconds Charging time at maximum energy setting is less than 10 seconds Can perform 5 to 10 welds per minute, depending on energy setting.
Controls
Provides energy adjustment control, dual 2 position energy range switch, and LED displays to indicate charging and energy storage status. Provides energy adjustment control, dual 2 position energy range switch, and LED displays to indicate charging and energy storage status. Initiation of the welding discharge is controlled by a front panel snap action push button switch, a similar compani Provides energy adjustment control, and visual and audio indication of weld charge cycle completion.
Power
Uses 120 VAC 60 Hz line power (220 VAC 50 Hz optional) Circuit protected by 3 amp breaker. Uses 120 VAC 60 Hz line power (220 VAC 50 Hz optional) Circuit protected by 1.5 amp breaker Will operate from AC line power or self-charging internal battery. 120 VAC 60 Hz (220 VAC 50 Hz optional)
Print Back