Search Catalog:
By Part Number
By Keyword
Hot Spot I
Thermocouple Welder
Hot Spot II
Thermocouple Welder
HotSpot
PLUS
Capacitive Discharge Stud & Thermocouple Welder
Welder Expansion Kits
Welder Accessories
Thermocouple Wire
HotSpot Users
Registered Users
–
Sign In
|
Shipping
|
Tax
|
Terms
Shopping Cart
0 Items
Request for Quote
0 Items
All Categories
>
Compare HotSpot Welders
>
Compare Items
Compare Items
Check one or more items to request information.
larger image
Compare HotSpot Welders
Our HotSpot capacitive discharge thermocouple welders are designed to solve your thermocouple fabrication and attachment problems. Using stored energy, the welder generates an electric arc for fusing standard thermocouple elements into freestanding beads. This same process can be used to weld the thermocouple directly to any thickness base metal, as well as to close tubes, attach pins, or perform light spot welding. There are three models to suit your application needs.
Printable Page
Email This Page
Save To Favorites
Please wait…
Items
20-A10120R
HotSpot II Heavy Duty Welder
40-A10240R
HotSpot PLUS CD Welder
10-A1020R
HotSpot Thermocouple Welder
List Price
$1,095.00
$1,595.00
$745.00
Product Type
Thermocouple Welders
Heavy Duty Thermocouple Welders
Thermocouple Welders
Height
3.5
inches
3.5
inches
3.25
inches
Depth
8.5
inches
8.5
inches
6.25
inches
Width
11.5
inches
11.5
inches
6
inches
Weight
14
lbs
18
lbs
6.25
lbs
Stored Weld Energy
5 to 250
watt/sec
5 to 525
watt/sec
5 to 50
watt/sec
Weld Capability
Welds wire pairs of #14 gauge or finer, and #8 or lighter studs
Welds wire pairs of #12 gauge or finer, and #10 or lighter studs, and #10 pins
Welds wire pairs of #24 gauge or finer (#20 for J, K & E)
Cycle Time
Charging time at maximum energy setting is less than 10 seconds
Charging time at maximum energy setting is less than 10 seconds
Can perform 5 to 10 welds per minute, depending on energy setting.
Controls
Provides energy adjustment control, dual 2 position energy range switch, and LED displays to indicate charging and energy storage status.
Provides energy adjustment control, dual 2 position energy range switch, and LED displays to indicate charging and energy storage status. Initiation of the welding discharge is controlled by a front panel snap action push button switch, a similar compani
Provides energy adjustment control, and visual and audio indication of weld charge cycle completion.
Power
Uses 120 VAC 60 Hz line power (220 VAC 50 Hz optional) Circuit protected by 3 amp breaker.
Uses 120 VAC 60 Hz line power (220 VAC 50 Hz optional) Circuit protected by 1.5 amp breaker
Will operate from AC line power or self-charging internal battery. 120 VAC 60 Hz (220 VAC 50 Hz optional)
DCC Corporation | 7250-B Westfield Ave. Lower Level | Pennsauken, NJ 08110 | 856-662-7272
Copyright 2013 DCC Corporation. All Rights Reserved.
